Built for poster runs and everyday workshop use
The Poster Shop Frame is made for print shops that run larger artwork, repeat jobs and frequent screen changes. It gives you a stable aluminium frame with a clean, square edge so your mesh sits evenly across the print area and holds tension properly for longer. For poster printers working with garment decoration, bold solids, fine type and layered colour work, that consistency matters.
Because the frame is aluminium, it handles workshop use better than soft timber options and it is less likely to twist with humidity. That helps in coastal areas like Cape Town, Durban and Gqeberha where damp air can affect materials, and in inland workshops where dust and load-shedding interruptions can slow production. If you need a frame that can be stretched, cleaned and used again, this is the sort of frame that earns its place in the shop.
Sizes and options that suit different print setups
We supply custom size stretching for poster printers who want a frame matched to their job size, platen setup or drying area. If you are working with larger image areas, it is worth checking the full outside size as well as the clear print area, since both affect how the frame fits your process.
- Custom outside dimensions to suit your workshop and press setup
- Square or rectangular formats for poster work and garment printing
- Mesh supplied and stretched to the tension required for the job
- Restretching options for existing frames that are still sound
- Bulk screen orders for repeat production and multiple artwork sizes
For shops in Maitland, Bellville, Pretoria or Johannesburg, it is often better to standardise a few sizes so your team can swap screens quickly. That saves time during busy periods and makes stock easier to manage.
Where this frame works best
This frame suits printers who need repeat use across posters, transfers, garment decoration and promotional work. It is a practical choice for screen printers handling schools, events, retail artwork and short production runs where the same screen may come back into use several times. If you print on heavier inks or need a larger image area, the frame gives you the support needed for clean contact on the substrate.
It also suits hobby printers who want a proper workshop-grade frame rather than a light one that loosens too quickly. Smaller studios in Paarl or Gqeberha often want something that stores neatly, cleans well and can be collected, returned or delivered without fuss. The frame is suited to indoor workshop use and does not need power or gas to operate, only the usual stretching and cleaning equipment used in screen preparation.
Installation, setup and what your workshop needs
Installation is straightforward, but accurate setup still matters. The frame should be inspected before stretching to confirm that the corners are square, the surface is clean and there is no distortion from previous use. Once the mesh is applied, even tension across the full area helps prevent breakdown during printing and reduces the chance of image movement.
Most workshops only need a clean bench, clamps or stretching equipment, adhesive application tools and enough space for curing and inspection. No power or gas is needed for the frame itself. If your workshop runs on an unstable electricity supply, which is common during load-shedding, this product still lets you continue with preparation work as long as your stretching and curing process can be managed safely. Keep the area free of oil, dust and solvent overspray so the bond stays reliable.
- Check the frame is flat before stretching
- Allow the adhesive to cure fully before use
- Store frames away from standing water and direct weather exposure
- Keep the mesh clean so ink build-up does not affect tension
How to care for the frame between print runs
Good care starts after every job. Remove ink residue while it is still workable, then clean the frame edges and mesh area so old product does not build up near the corners. If your shop uses strong cleaning chemicals, rinse properly and let the frame dry before storage. This is especially important in humid areas where trapped moisture can lead to unwanted odours or slower turnaround times.
We also recommend regular tension checks and frame inspections, particularly after heavy production runs. A frame can look fine at a glance but still have tension loss or adhesive fatigue. If you notice mesh movement, corner wear or a loose feel during printing, it may be time for restretching rather than pushing the screen harder. That small check can save a lot of time later, even if the workshop is under pressure.
What to check before you place an order
Before ordering, measure carefully and confirm how the frame will be used in your production flow. A few details up front make the job much easier and help us prepare the right size for your setup. If you are not sure, send through the measurements on the enquiry form and we can help you work through the options.
- Outside frame size and the clear print area you need
- Whether you need a new stretch or restretch on an existing frame
- Mesh count or mesh type required for your artwork and ink
- How many screens you need for bulk orders or repeat production
- Whether you want pickup and return, or a delivery route in your area
- Any urgency, especially if you need a quick turnaround for a job already booked
For customers in Cape Town, Johannesburg, Durban, Pretoria and Gqeberha, we can work around delivery routes and workshop timing where possible. If your job has a tight deadline, say so early, because urgent turnarounds need clear instructions and a clean frame spec from the start.
ScreenFrame support for stretching and supply
ScreenFrame makes aluminium screen-printing frames and handles stretching, cleaning and frame preparation from our Maitland workshop in Cape Town. Our team includes Mandla Petersen, Ayesha Daniels, Sibusiso Mthembu, Bianca Jacobs, Ruan van Wyk and Lindokuhle Dlamini, so your order is handled by people who know what screen printers need on the floor. We supply across South Africa through workshop collections, local supply routes and deliveries to major centres.
If you are running poster work in a busy shop, the right frame helps keep the process tidy and repeatable. A good frame should not fight the printer, it should stay square, hold tension and make the next run easier than the last.
Key facts
| Product type | Aluminium poster shop screen-printing frame |
|---|---|
| Use | Repeat-use screen printing for poster and garment decoration work |
| Size options | Custom sizing available to suit workshop and image area |
| Service options | New stretching, restretching, cleaning and inspection |
| Power or gas needs | None required for the frame itself |
| Supply area | Maitland, Cape Town with deliveries across South Africa |
